IU2FRL / EXPERIMENTAL HOMEBREW
Your IC-705.
A remote front panel.
Patch your firmware. Add the apps. Connect to your remote radio.
Before you start
Unofficial, experimental software. Modified firmware may damage your radio and void its warranty. Use reliable power and transmit only where your licence permits.
If already using modified firmware, boot the official 1.40 firmware before installing this one to preserve your original firmware slot. Start app tests on dummy loads with local VOX disabled and an independent timeout on the remote radio.
FIRMWARE PATCHER
1 Choose your firmware
Use the official, unmodified 705E140.dat from Icom.
- File
- Size
- MD5
Checking…
2 Build your update
- Input
-
- Output MD5
Extended transmit ranges
This firmware enables transmission outside amateur bands. Only transmit where your licence and local regulations allow.
Bootloader update included
Power loss during the bootloader write can brick the radio and require an external flash programmer for recovery. Use reliable power and never interrupt the update.
To switch firmware slots afterwards, hold POWER at startup until the LED blinks (about 3 seconds). Installing official firmware restores the stock bootloader.
WHAT'S NEW
Changelog
Firmware
- Added network access for homebrew apps.
- Added SD-card file and audio support.
- Kept the upstream transverter, scope and A/B boot features.
Apps
- Added the RS-BA1 remote client and SD-card FTP server.
- Added remote tuning, mode/filter, spectrum and waterfall.
- Added receive audio, optional microphone audio and physical PTT.
- Improved display, controls, audio stability and session handling.
Experimental builds; some changes still need further on-radio testing.
APP DOWNLOADS
3 Add your apps
Install the IC-705 E 1.40 network/file/audio firmware from the patcher first. Other radios, regions and firmware versions are not supported by these apps.
Copy the apps to \IC-705\Apps\ on the SD card, and your configuration to
\IC-705\Apps\rsba1\RSBA1.CFG. Launch from MENU > SET > Apps.
Press the physical EXIT key to close the remote client normally.
Experimental, use at your own risk. Use dummy loads and low power for initial
tests, disable local VOX, and set an independent timeout on the remote radio.
Network loss or a crash can leave it transmitting. FTP is unencrypted, uses the fixed
login icom / ic705, and should only be used on a trusted LAN.
Supported firmware & checksums
Only the official IC-705 E 1.40 file is accepted. Other versions, regions and radios are refused.
| Radio | Official file | Release | Output MD5 |
|---|---|---|---|
| Loading… | |||
Private by design. Your firmware is patched locally and checked before download. No uploads, analytics or third-party scripts.